Driving
Tips from Kirklake Garage
Driving
Tips ! | | Driving
Tips! |
A clean engine works more efficiently and uses less fuel.
Having your car regularly serviced and ensuring that the fuel and
oil system is cleaned will make the engine work more efficiently, use less fuel
and produce less CO2.
Pump up to cut down.
Check and adjust your tyre pressures regularly and also before
long journeys. Under-inflated tyres increase CO2 but over-inflated tyres can be
unsafe. Check your car manual for the correct tyre pressures.
Less clutter in your car means less CO2.
Removing extra weight could reduce your engine's workload. Burn
less fuel and cut your CO2 emissions by unloading any items you wont need before
your journey.
Driving at an appropriate speed reduces CO2.
Staying at or within the speed limit not only increases driver
safety but also reduces CO2 emissions and saves money on your petrol costs. At
70mph you could be using up to 9% more fuel than at 60mph and up to 15% more fuel
than at 50mph.
Less stopping and starting means less CO2.
Keep an eye on the traffic ahead and slow down early by gently
lifting your foot off the accelerator while keeping the car in gear.
Over revving accelerates emissions.
Using your gears wisely by changing up a gear a little earlier
can also reduce revs. If you drive a diesel car, try changing up a gear when the
rev counter reaches 2000rpm. For a petrol car change up at 2500rpm.
Idling is wasting fuel.
When the engine is idling, you're wasting fuel and adding to CO2
emissions. If you're likely to be at a standstill for more than 3 minutes, simply
switch off the engine.
|